HP MR Gen10 Plus Скачать руководство пользователя страница 142

Страница: 142 / 179

Erasing a logical drive

Procedure

1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen10+ > Main Menu > Logical Drive Management.

2. In the Logical Drive Management screen, select the logical drive.

3. In the Logical Drive screen, select Logical Drive Erase from the Operation drop-down menu.

4. Select one of the following options from the Erase Mode drop-down menu:

Simple - Writes a pattern to the logical drive in a single pass.

Normal - A three-pass operation that first overwrites the drive contents with random values then overwrites it twice with
patterns.

Thorough - Repeats the Normal drive erase operation three times.

5. If you want to delete the logical drive after the erase is completed, click Delete After Erase.

6. Click Go.

7. Review warning messages and click Confirm and Yes to proceed.

Erasing a logical drive

142

Содержание MR Gen10 Plus




















































































































































































Результаты поиска

Содержание MR Gen10 Plus

Отзывы:

HP MR Gen10 Plus, Руководство пользователя, Страница: 142 / 179

Результаты поиска

Содержание MR Gen10 Plus

Отзывы: