HP MR Gen10 Plus Скачать руководство пользователя страница 136

Страница: 136 / 179

Configuring Task Rates

Procedure

1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen10+ > Main Menu > Controller Management.

2. In the Controller Management screen, select Advanced Controller Properties .

3. In the Advanced Controller Properties screen, click Task Rates to configure the Task Rates.

4. In the Spare screen, configure the following task rates:

Background initialization (BGI) Rate - the percentage of system resources dedicated to perform a background initialization on a
redundant logical drive.

Consistency Check Rate - the percentage of system resources dedicated to perform a consistency check operation on a
redundant logical drive.

Patrol Read Rate - the percentage of system resources dedicated to perform a Patrol Read operation on configured drives.

Rebuild rate - the percentage of system resources dedicated to rebuild data on a new drive after a storage configuration drive
has failed.

Transformation Rate - the percentage of system resources dedicated to perform a RAID level migration or online capacity
expansion on a logical drive.

5. Click Apply Changes.

Configuring Task Rates

136

Содержание MR Gen10 Plus




















































































































































































Результаты поиска

Содержание MR Gen10 Plus

Отзывы:

HP MR Gen10 Plus, Руководство пользователя, Страница: 136 / 179

Результаты поиска

Содержание MR Gen10 Plus

Отзывы: