HP MR Gen10 Plus Скачать руководство пользователя страница 118

Страница: 118 / 179

Managing the controller

Procedure

1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen10+ > Main Menu > Controller Management.

2. In the Controller Management screen, view the basic properties of the controller:

Property

Description

Product name

The name of the controller.

Serial number

Controller serial number.

Controller status

Possible options are Optimal, Needs Attention, Failed, or Safe Mode.

Select Boot Device

The selected primary bootable device.

PCI ID

Manufacturer-assigned ID.

PCI Slot Number

ID of the PCI Slot that contains the controller.

Active package version Active version of the controller package.

Backup package version Backup version of the controller package.

CPLD version

CPLD version.

Connector count

Number of host data ports/connectors on the controller.

Drive count

Number of drives currently attached to this controller.

Logical drive count

Number of logical drives on the controller.

3. Click Advanced Controller Management to perform advanced controller tasks.

For more information, see Advanced Controller Management.

4. Click Advanced Controller Properties to configure advanced controller settings.

Managing the controller

118

Содержание MR Gen10 Plus




















































































































































































Результаты поиска

Содержание MR Gen10 Plus

Отзывы:

HP MR Gen10 Plus, Руководство пользователя, Страница: 118 / 179

Результаты поиска

Содержание MR Gen10 Plus

Отзывы: