Server Configuration and Utilities
8-6
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: i-ch8 Server Configuration and Utilities.doc
Codename: Seattle Slew Part Number: 225579-002 Last Saved On: 1/8/03 3:19 PM
Server Passwords
The
Server Passwords
menu enables you to set up passwords to limit access to the
system and its setup options. The following selections are available in this menu:
•
Set Administrator Password
enables you to assign an administrator password.
This password prevents unauthorized users from modifying the setup options.
•
Set Power-On Password
enables you to assign a power-on password. This
password prevents unauthorized users from powering on the system.
•
Network Server Mode
enables the user to disable or enable the system’s
capability to boot with a locked keyboard or without a keyboard. To unlock the
keyboard, enter the power-on password.
•
QuickLock
enables you to lock your keyboard and prompts you for the
power-on password to unlock the keyboard.
IMPORTANT:
If you forget your password, you can clear all passwords by resetting the
system configuration switch. See “System Board Switches” in Appendix C, “System LEDs
and Switches.”
Server Asset Text
The
Server Asset Text
menu enables you to access the
Server Info Text
.
•
Set Server Info Text
enables the user to identify the system with an Asset
Tracking Number.
•
Set Administrator Info Text
enables you to add an administrator name.
•
Set Service Contact Text
enables you to add service contact information.
Advanced Options
The
Advanced Options
menu enables you to configure advanced options of the
system. The following selections are available in this menu:
•
MPS Table Mode
enables you to change the APIC table setting. The APIC table
setting is automatically set by OS selection.
