Server Configuration and Utilities
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
8-3
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: i-ch8 Server Configuration and Utilities.doc
Codename: Seattle Slew Part Number: 225579-002 Last Saved On: 1/8/03 3:19 PM
Saving RBSU Configuration Settings
RBSU automatically saves settings when you press the
Enter
key. The utility does
not prompt you for confirmation of settings before you exit the utility. To change a
selected setting, you must select a different setting and press the
Enter
key.
Using RBSU
RBSU does not run automatically. The first time you power up the server, the system
defaults to Windows 2000 and waits temporarily so you can select a different
operating system by using RBSU. Press the
F9
key to enter RBSU. While you are in
RBSU, press any key to return to the RBSU main menu, or exit RBSU by pressing
the
Esc
key, then pressing the
F10
key at the prompt.
NOTE:
Most of the features in RBSU are not required in the setup of your server. The options
in this utility are designed to assist with specific server configuration issues.
RBSU is divided into a series of menu selections designed to configure specific areas
of the system. The primary menus are as follows:
•
System Options
•
PCI Devices
•
Standard Boot Order (IPL)
•
Boot Controller Order
•
Date and Time
•
Automatic Server Recovery
•
Server Passwords
•
Server Asset Text
•
Advanced Options
•
Utility Language
For a complete explanation of RBSU features and functions, refer to the
ROM-Based
Setup Utility User Guide
on the Documentation CD.
