PCI-X Technology
4-24
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: e-ch4 PCI-X Technology.doc
Codename: Seattle Slew Part Number: 225579-002 Last Saved On: 1/8/03 3:14 PM
Viewing Slot Detail Information
To view slot detail information:
1.
From the
Main
menu, highlight the slot and expansion board information to be
viewed.
2.
Press the
Enter
key.
3.
Select
Slot Detail Information
from the
Slot Options
menu.
Removing an Expansion Board
To remove an expansion board:
1.
From the
Main
menu, highlight the slot and expansion board to be removed.
2.
Press the
Enter
key to go to the
Slot Options
menu.
3.
Use the arrow keys to highlight
Remove Expansion Board
and press the
Enter
key. NCMCON then processes the remove request.
4.
Be sure that the slot has a status of POWERED down and the green LED is no
longer illuminated.
5.
Open the expansion slot latch.
6.
Remove the expansion board from the slot. NCMCON updates the status of
the slot.
Replacing an Expansion Board
To replace an expansion board:
1.
Remove the expansion board from the slot. See the “Hot Removing an Expansion
Board” section in this chapter.
2.
Be sure that the slot has a status of POWERED down and the green LED is not
illuminated.
3.
Install the new expansion board in the slot.
4.
Close the expansion slot latch.
