Server Configuration and Utilities
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide
5-17
HP CONFIDENTIAL
Writer: Rob Weaver File Name: f-ch5 Server Configuration and Utilities.doc
Codename: Flashback Part Number: 322383-001 Last Saved On: 2/11/03 1:26 PM
•
•
•
•
To install the Survey Utility, use the Management CD in the
HP ProLiant Essentials
Foundation Pack
or refer to the HP website (
www.hp.com/servers/manage
).
Integrated Management Log
The IML records hundreds of events and stores them in an easy-to-view form. The
IML timestamps each event with 1-minute granularity.
You can view recorded events in the IML in several ways, including the following:
From within Insight Manager 7
From within Survey Utility
From within operating system-specific IML viewers
— For NetWare: IML Viewer
— For Windows: Event Viewer or IML Viewer
— For Linux: IML Viewer Application
From within Enterprise Diagnostics LX32 Utility
For more information, refer to the
Servers Troubleshooting Guide
on the
Documentation CD, or the Management CD in the
HP ProLiant Essentials
Foundation Pack
.
Power-On Self-Test
POST is a series of diagnostic tests that checks firmware and assemblies to ensure
that the server is functioning properly. This utility runs automatically every time the
server is powered up.
Refer to Appendix D, “Server Specific Troubleshooting,” for the normal power-up
sequence and diagnosis of problems encountered during POST.
