D
Server Specific Troubleshooting
Use the sections in this appendix to diagnose server startup and installation problems.
For information on LEDs, switch settings, and jumpers, refer to Chapter 1,
“Component Identification.”
For information about general troubleshooting techniques, diagnostic tools,
preventative maintenance, and a complete list of error messages, refer to the
Servers
Troubleshooting Guide
on the Documentation CD.
When the Server Does Not Start
This section provides step-by-step instructions when encountering the most common
problems during the initial Power-On Self-Test (POST). Every time the server boots,
it must complete POST before it can load the operating system and start running
software applications.
If the server completes POST and attempts to load the operating system, refer to
“Problems After Initial Power Up” in this appendix.
WARNING: A risk of personal injury exists from hazardous energy levels. The
installation of options and the routine maintenance and service of this product
must be performed by individuals who are knowledgeable about the
procedures, precautions, and hazards associated with equipment containing
hazardous energy circuits.
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide
D-1
HP CONFIDENTIAL
Writer: Rob Weaver File Name: k-appd Server Specific Troubleshooting.doc
Codename: Flashback Part Number: 322383-001 Last Saved On: 2/11/03 1:35 PM
