HP Linear Barcode Scanner II, Руководство программиста, Страница: 24 / 306

Enter/Exit Programming Mode Intercharacter Delay
14 Programming Reference Guide
Intercharacter Delay
This parameter specifies the intercharacter delay between the end of one char-
acter and the beginning of the next. The delay can be set within a range of zero
(0) to 990 milliseconds in 10ms increments. A setting of zero specifies no
delay. See "Intercharacter Delay" on page 232 or "Intercharacter Delay" on
page 239 for more detailed programming instructions.
$CR2IC00 
Intercharacter Delay = No Delay
$CR2IC
Select Intercharacter Delay Setting
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the beginning.
~
CANCEL
DEFAULT
00 = No Intercharacter Delay