15
AC SOCKET CN1
Repair the AC Socket connector:
1)
Use a hot air gun to melt the solder on the pins. Pin solder with soldering iron and absorber. You can gently
push down with the soldering iron once everything is molten to move the CN1 out of the through holes.
2)
Lift the AC Socket connector from the PCB.
3)
Place the new component on the PCB. Be sure that it matches the PCB footprint.
4)
Solder the new component.
Micro USB CN102
Repair the USB connector:
1)
Use a soldering iron and a desoldering pump to remove as much solder as possible from the pin.
2)
Use a hot air gun to melt the solder on the pins.
3)
Lift the USB connector from the PCB.
4)
Place the new component on the PCB. Be sure that it matches the PCB footprint.
5)
Solder the new component.
Содержание L7014
Страница 4: ......
