NOTE:
Once you install a memory card, all new images and video clips are stored
on the card, rather than in internal memory. To use internal memory and view images
stored there, turn off the camera then remove the memory card. To transfer images
from internal memory to an optional memory card, see
Move Images to Card
under
“Using the Playback Menu” on page 19
.
For information about supported memory cards, see
“Storage” on page 43
.
Install the software
The HP Photosmart Software provides features for transferring images and video clips
to your computer, as well as features for modifying stored images (remove red eyes,
rotate, crop, resize, and more).
To install the HP Photosmart Software, your computer must meet the system
requirements as stated on the camera packaging.
If you have trouble installing or using the HP Photosmart Software, see the Hewlett-
Packard Technical Support website for more information:
www.hp.com/support
. Known
issues are often fixed with new releases of firmware. To optimize your digital photography
experience, periodically check this website for updates to your camera's firmware,
software, and drivers.
To learn about Windows Vista support for your camera, see
www.hp.com/go/
windowsvista
(English only).
Windows:
1.
Close all programs and temporarily disable any virus protection software.
2.
Insert the HP Photosmart Software CD into the CD drive and follow the on-screen
instructions. If the installation screen does not appear, click
Start
, click
Run
, type
D:
\Setup.exe
, where
D
is the letter of your CD drive, then click
OK
.
3.
When the software has finished installing, re-enable virus protection software.
Macintosh:
1.
Insert the HP Photosmart Software CD into the CD drive.
2.
Double-click the CD icon on the computer desktop.
3.
Double-click the installer icon, then follow the on-screen instructions.
Once installation is complete and you have restarted your computer,
System
Preferences
automatically opens to the
HP Photosmart Camera
settings. You may
change settings so the HP Photosmart Software starts automatically when you connect
your camera to your Macintosh (click the help button on the
HP Photosmart Camera
settings dialog for more information).
Using your camera
Now that you’ve completed setup, you can take and review pictures and video clips.
For information on taking pictures and recording
video clips
See
“Taking pictures” on page 9
and
“Recording video clips” on page 10
For information on setting picture capture and
video record settings
See
“Setting options for taking pictures and
recording video clips” on page 14
Using your camera
7