HP J4819A, Руководство по установке и началу работы

Страница: 37 / 108

2-17
Installing the Switch 5300xl Series
Installation Procedures
In
st
a
lli
n
g
the
S
w
itch
5300xl
Se
ries
Wall Mounting
The mounting brackets supplied with the switch allow you to mount it on a
wall. The illustrations below show mounting a Switch 5308xl/5372xl. The
Switch 5304xl/5348xl would be mounted in a similar way.
C a u t i o n
For safe operation, do not install the switch with the vents or fans facing
downward. The only recommended and supported wall mounting orientation
is with the unit upright and the modules facing out, as shown in the illustra-
tions below.
Additionally, the switch should be mounted only to a wall or wood surface
that is at least 1/2-inch plywood or its equivalent.
1. Use a #1 Phillips
(cross-head)
screwdriver and
attach the
mounting brackets
to the switch with
the included
10-mm M4 screws.
2. Attach the
switch to the
wall or wood
surface with four
5/8-inch number
12 wood screws
or larger (not
included).
10 mm
M4 screws
Figure 2-11. Attaching brackets to the rear of the
switch
5/8-inch
number 12
wood screws
Figure 2-12. Mounting to a wall