HP Integrity rx6600 Скачать руководство пользователя | Manualshive

Страница: 48 / 84

background image

Table 13 ARP Ping Commands

Description

ARP Command

This command assign the IP address to the iLO 2 MP MAC address. This ARP table entry maps
the MAC address of the iLO 2 MP LAN interface to the static IP address designated for that
interface.

arp -s

This command tests network connections. It verifies the iLO 2 MP LAN port is configured with
the appropriate IP address.

ping

The following procedure explains how to use the ARP Ping utility using a PC that is connected to
the network that is on the same physical subnet as the server.

To configure a static IP address using the ARP Ping utility, follow these steps:
1.

Obtain the iLO 2 MP MAC address. To set the IP address using ARP, you must know the MAC
address of the iLO 2 MP LAN. You can find the MAC address of the iLO 2 MP LAN on a label
on the server.

IMPORTANT:

Make sure you obtain the MAC address to the iLO 2 MP LAN and not the

MAC address to the server core LAN.

2.

Verify that an active LAN cable on the local subnet is connected to the iLO 2 MP LAN port
on the server.

3.

Access a PC on the same physical subnet as the server.

4.

Open a DOS window on the PC.

5.

At the DOS prompt, enter

arp -s

to assign the IP address to the iLO MAC address.

Syntax

arp -s

<

IP address you want to assign to the iLO MAC address

> <

iLO

2 MAC address

>

Example from Windows

arp -s 192.0.2.1 00-00-0c-07-ac-00

6.

At the DOS prompt, enter

ping

followed by the IP address to verify that the iLO 2 MP LAN

port is configured with the appropriate IP address. The destination address is the IP address
that is mapped to the iLO MAC address. Perform this task from the PC that has the ARP table
entry.

Syntax

ping

<

IP address just assigned to the iLO MAC address

>

Example from Windows

ping 192.0.2.1

7.

Use the IP address to connect to the iLO 2 MP LAN.

8.

Use web or telnet access to connect to the iLO 2 MP from a host on the local subnet and
complete the rest of the LAN parameter (gateway, subnet).

Configuring the iLO 2 MP LAN Using the RS-232 Serial Port

To configure the iLO 2 MP LAN using the RS-232 serial port, follow these steps:

IMPORTANT:

Do not configure duplicate IP addresses on different servers within the same network.

The duplicate server IP addresses conflict and the servers cannot connect to the network.

The

LC

command enables you to configure an IP address, host name, subnet mask, and gateway

address.

48

Installing the System

«
...
46
47
48
49
50
...
»

Содержание Integrity rx6600





















































































Отзывы:

Нет отзывов

Похожие инструкции для Integrity rx6600

Бренд: Acer Страницы: 11

Бренд: Acer Страницы: 2

Бренд: HAGOR Страницы: 8

SPAS 2400/LC + MU

Бренд: VOLTCRAFT Страницы: 4

Бренд: Dynex Страницы: 2

Бренд: Targus Страницы: 103

Бренд: Conrad Страницы: 4

Бренд: Origaudio Страницы: 1

Бренд: Renkforce Страницы: 8

Бренд: U.S. Converters Страницы: 8

CoolPower MPS50

Бренд: Waeco Страницы: 84

Бренд: EtherWAN Страницы: 21

Бренд: Fujitsu Страницы: 49

P-600 - Stylistic LT

Бренд: Fujitsu Страницы: 280

Бренд: Fujitsu Страницы: 14

Бренд: JVC Страницы: 44

Бренд: Sony Страницы: 2

BRAVIA KDL-60EX701

Бренд: Sony Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды