HP Integrity rx5670, Руководство по установке оборудования

Страница: 31 / 46

Chapter 2
Installing Additional Components
Installing PCI Cards
31
Installing PCI Cards
This section provides information about installing PCI Cards. PCI Cards are located in the Side Service Bay.
WARNING Ensure that the system is powered-down and all power sources have been
disconnected from the server prior to attempting the following procedure.
Voltages are present at various locations within the server whenever an AC power
source is connected. This voltage is present even when the main power switch is in
the off position.
Failure to observe this warning could result in personal injury or damage to
equipment.
CAUTION
Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD
safety precautions could result in damage to the server.
Removing the Side Cover
To remove the Side Cover, perform the following steps:
1. Loosen the captive T-15 screws that hold the Side Cover in place.
2. Grasp the strap handle, pull the Side Cover slightly away from the server, and pull the cover toward the
front of the server to free the cover tabs from the slots in the rear of the chassis.