HP integrity rx2800 i4, Руководство пользователя

Страница: 45 / 156

Installing expansion boards
The server supports up to two PCIe riser boards. Each PCIe riser board holds up to three PCIe
cards. The standard riser board configuration contains one riser board with one full-length, full-height
PCIe x8 slot, and two half-length, full-height PCIe x4 slots. The second board contains one full-length,
full-height PCIe x8 slot, and two half-length, half-height PCIe x4 slots.
Optionally, you can purchase a riser board that contains two full-length PCIe x8 slots.
Installing a half-length expansion board
1. Remove the access panel. See “Removing the access panel” (page 42) .
2. Remove the PCI riser cage. See “Removing the PCI riser cage” (page 43) .
3. Remove the expansion slot cover. See “Removing expansion slot covers” (page 44) .
4. Install the expansion board.
5. Connect any required internal cables to the expansion board.
6. Reinsert the PCI riser cage into the chassis.
7. Connect any required external cables to the expansion board.
Installing a full-length expansion board
1. Remove the access panel. See “Removing the access panel” (page 42) .
2. Remove the PCI riser cage. See “Removing the PCI riser cage” (page 43) .
3. Remove the expansion slot cover. See “Removing expansion slot covers” (page 44) .
4. Install the expansion board.
HP Confidential Installing expansion boards 45