7.
Remove the super capacitor pack.
To replace the component, reverse the removal procedure.
Removing and replacing the processor baffle
CAUTION:
To prevent damage to the server, never power on a server without a processor baffle
or processor in each processor socket. The processor baffle is needed for proper system cooling.
CAUTION:
Immediately install a processor baffle in an empty processor socket. To avoid damage
to the socket pins, the socket must never be uncovered for more than 5 seconds. If the socket is
damaged, the entire system board must be replaced.
1.
Power off the server and remove it from the rack (
“Powering off the server” (page 99)
and
“Removing the server from the rack” (page 99)
).
2.
Remove the access panel (
).
3.
Open the processor cage.
HP Confidential
116
Removal and replacement procedures
