To replace the component, reverse the removal procedure.
System board
CAUTION:
To prevent damage to the system board, do not remove the system board from the server blade.
In the event of a system board failure, both the system board and the server blade are replaced.
Before sending in the system board and server blade for replacement, remove the following components:
• The processor and heatsink module (
on page 123)
• The processor air baffle (
• The DIMMs (
on page 121)
• The DIMM baffle (
on page 120)
• The Smart Array Supercap Pack (
• The Mezzanine cards (
on page 127)
• The ICH mezzanine board (
on page 128)
on page 118)
Remove these items from the replacement base unit and place them on the defective base unit for
protection during return shipment:
Item
Quantity
Protective processor covers
2
Mezzanine covers
4
Backplane connector covers
2
After replacing the system board and server blades:
System board
129
Содержание Integrity BL860c i4
Страница 7: ...W 163 Contents 7 ...