Preinstallation worksheets 14
Preinstallation worksheets
This section contains information lists for data needed during the appliance installation and configuration.
If you are expanding an existing configuration, you will need to obtain data from the existing appliance and
add any data for an expansion node.
Appliance networks
For each network type (ESXi, vSphere vMotion, Storage), you choose the first IP address in the range for
that group. Once that IP address is chosen, OneView InstantOn automatically increments and assigns the
remaining IP addresses for that group. Each network type assigned in OneView InstantOn requires
contiguous IP addresses.
Use the worksheets for an initial installation and for an expansion.
ESXi Network Components
To help you plan the ESXi management network, see "ESXi management network IP addresses (on page
)."
ESXi network components
Value
Starting IP address
(used by the HC380 Management VM during
initial installation or by the first ESXi node being
added during an expansion)
Subnet Mask
Gateway
vSphere vMotion IPs
To help you plan the vSphere vMotion network, see "vSphere vMotion network IP addresses (on page
)."
vSphere vMotion IPs
Value
Starting IP address
Subnet Mask
VLAN ID (optional, for CloudSystem)
Storage network IPs
To help you plan the storage network, see "Storage network IP addresses (on page
)."
Storage network IPs
Value
Starting IP address
Subnet Mask
Gateway
VLAN ID (optional, for CloudSystem)
HC380 Management UI VM
