HP HPE ProLiant DL180 Gen10 Скачать руководство пользователя страница 96

Страница: 96 / 157

Type the serial number and press

Enter

Select the Product ID field and press

Enter

The following alert appears:

Product ID is modified only by qualified personnel. This value must match
the product ID located on the chassis.

Type the product ID and press

Enter

Press

F10

to save the configuration.

The procedure is complete.

HPE Trusted Platform Module 2.0 Gen10 Option

The HPE Trusted Platform Module 2.0 Gen10 Option is not a customer-removable part.

CAUTION:

If the TPM is removed from the original server and powered up on a different server,

data stored in the TPM including keys will be erased.

If you suspect a TPM board failure, leave the TPM installed and remove the system board (

Removing

and replacing the system board

). Contact a Hewlett Packard Enterprise authorized service provider for

a replacement system board and TPM board.

Removal and replacement procedures

Содержание HPE ProLiant DL180 Gen10






























































































































































Результаты поиска

Содержание HPE ProLiant DL180 Gen10

Отзывы:

Бренды по названию

Популярные бренды

HP HPE ProLiant DL180 Gen10, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание HPE ProLiant DL180 Gen10

Отзывы:

Бренды по названию

Популярные бренды