HP HPE FlexNetwork MSR Router Series, Руководство по настройке

Страница: 363 / 594

353
Step Command Remarks
6. Redistribute VPN routes.
import-route protocol
[ process-id | all-processes |
allow-ibgp ] [ allow-direct | cost
cost | nssa-only | route-policy
route-policy-name | tag tag | type
type ] *
By default, no routes are
redistributed into OSPFv3.
7. (Optional.) Configure filtering
of advertised routes.
filter-policy
{ acl6-number |
ipv6-prefix ipv6-prefix-name }
export [ bgp4+ | direct | isisv6
process-id | ospfv3 process-id |
ripng process-id | static ]
By default, redistributed routes
are not filtered.
8. (Optional.) Configure the
default external route tag for
redistributed VPN routes.
default tag tag
By default, the default external
route tag is 1.
Perform this configuration on the
MCE.
9. Return to system view.
quit N/A
10. Enter interface view.
interface interface-type
interface-number
N/A
11. Enable the OSPFv3 process
on the interface.
ospfv3 process-id area area-id
[ instance instance-id ]
By default, OSPFv3 is disabled on
an interface.
Configuring IPv6 IS-IS between an MCE and a PE
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create an IS-IS process for
an IPv6 VPN instance and
enter IS-IS view.
isis [ process-id ] vpn-instance
vpn-instance-name
N/A
3. Configure a network entity
title.
network-entity net By default, no NET is configured.
4. Create the IS-IS IPv6 unicast
address family and enter its
view.
address-family ipv6 [ unicast ]
By default, the IS-IS IPv6 unicast
address family is not created.
5. (Optional.) Redistribute VPN
routes.
import-route protocol
[ process-id ] [ allow-ibgp ]
[ allow-direct | cost cost |
[ level-1 | level-1-2 | level-2 ] |
route-policy route-policy-name |
tag tag ] *
By default, IPv6 IS-IS does not
redistribute routes from any other
routing protocol.
If you do not specify the route
level in the command, the
command redistributes routes to
the level-2 routing table.
6. (Optional.) Configure filtering
of advertised routes.
filter-policy { acl6-number |
prefix-list prefix-list-name |
route-policy route-policy-name }
export [ protocol [ process-id ] ]
By default, IPv6 IS-IS does not
filter advertised routes.
7. Return to system view.
quit N/A
8. Enter interface view.
interface
interface-type
interface-number
N/A
9. Enable the IPv6 IS-IS
process on the interface.
isis ipv6 enable
[ process-id ]
By default, no IPv6 IS-IS process
is enabled on the interface.