HP HPE FlexNetwork MSR Router Series, Руководство по настройке

Страница: 358 / 594

348
To configure OSPFv3 between an MCE and a VPN site:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create an OSPFv3 process
for a VPN instance and enter
OSPFv3 view.
ospfv3 [ process-id |
vpn-instance
vpn-instance-name ] *
Perform this configuration on the
MCE. On a VPN site, configure
common OSPFv3.
The maximum number of OSPFv3
processes for a VPN instance
depends on the device memory.
Deleting a VPN instance also
deletes all related OSPFv3
processes.
3. Set the router ID.
router-id
router-id N/A
4. (Optional.) Configure an
OSPFv3 domain ID.
domain-id { domain-id
[
secondary
] |
null
}
The default domain ID is 0.
Perform this configuration on the
MCE.
All OSPF processes of the same
VPN must be configured with the
same OSPF domain ID to ensure
correct route advertisement.
5. Redistribute remote site
routes advertised by the PE.
import-route protocol
[ process-id | all-processes |
allow-ibgp ] [ allow-direct | cost
cost | nssa-only | route-policy
route-policy-name | tag tag | type
type ] *
By default, no routes are
redistributed into OSPFv3.
6. Return to system view.
quit
N/A
7. Enter interface view.
interface interface-type
interface-number
N/A
8. Enable OSPFv3 on the
interface.
ospfv3 process-id area area-id
[ instance instance-id ]
By default, OSPFv3 is disabled on
an interface.
Configuring IPv6 IS-IS between an MCE and a VPN site
An IPv6 IS-IS process belongs to the public network or a single IPv6 VPN instance. If you create an
IPv6 IS-IS process without binding it to an IPv6 VPN instance, the process belongs to the public
network.
By configuring IPv6 IS-IS process-to-IPv6 VPN instance bindings on a MCE, you allow routes of
different IPv6 VPNs to be exchanged between the MCE and the sites through different IPv6 IS-IS
processes. This ensures the separation and security of IPv6 VPN routes. For more information about
IPv6 IS-IS, see
Layer 3—IP Routing Configuration Guide .
To configure IPv6 IS-IS between an MCE and a VPN site:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create an IPv6 IS-IS process
for a VPN instance and enter
IS-IS view.
isis
[ process-id ]
vpn-instance
vpn-instance-name
Perform this configuration on the
MCE. On a VPN site, configure
common IPv6 IS-IS.
3. Configure a network entity
title for the IS-IS process.
network-entity net By default, no NET is configured.