NOTE:
This section of the HP Smart Array Support Guide focuses on the
sautil
command
options used to confirm, or change, physical disk firmware. The other
sautil
command options
listed in the
sautil
help screen and detailed in the
sautil
manpages are explained in
.
You must log in as a superuser to run the
sautil
command.
Before running the
sautil
command to confirm or update physical disk firmware, you must know
the device file name for the Smart Array Controller and the SCSI channel and SCSI ID for each
physical disk attached to the Smart Array Controller.
Determining the Smart Array controller device file
Determine the device file name for the Smart Array Controller from the output of the
ioscan
-kfnd ciss
command. An example of the
ioscan
output listing the Smart Array Controller
device files follows.
# ioscan -kfnd ciss
Class I H/W Path Driver S/W State H/W Type Description
==========================================================================
ext_bus 5 0/6/0/0/0/0/1/0/0/0 ciss CLAIMED INTERFACE PCIe SAS SmartArray P400 RAID Controller
/dev/ciss5
In the example,
/dev/ciss5
is the device file for the Smart Array P400 Controller.
Determining the Connector/Enclosure/Bay and firmware version for physical disks
You can determine the Connector/Enclosure/Bay and current firmware version for each physical
disk attached to the Smart Array Controller by using the
sautil <device_file>
command
(extensive output), or the
sautil <device_file> -s
command (shortened output).
The
sautil <device_file> -s
command displays an abbreviated list of information for the
Smart Array Controller and connected devices, including a SAS/SATA DEVICE SUMMARY that
lists the Connector/Enclosure/Bay for each physical disk attached to the Smart Array Controller.
The firmware version installed on each physical disk is also included in the
sautil
<device_file> -s
command output. For example:
# sautil /dev/ciss5 –s
******************************************************************************
**** ****
**** S A U T I L S u p p o r t U t i l i t y ****
**** ****
**** for the HP SmartArray RAID Controller Family ****
**** ****
**** version A.02.11 ****
**** ****
**** (C) Copyright 2003-2006 Hewlett-Packard Development Company, L.P. ****
******************************************************************************
---- DRIVER INFORMATION ------------------------------------------------------
Driver State........................ READY
---- CONTROLLER INFORMATION --------------------------------------------------
Controller Product Number........... P400
Controller Product Name............. HP PCIe SmartArray P400
Hardware Path....................... 0/6/0/0/0/0/1/0/0/0
Serial Number....................... PA5360BBFSW2ON
Device File......................... /dev/ciss5
Hardware Revision................... ‘B’
Firmware Revision (in ROM).......... 2.08
# of Logical Drives................. 1
# of Physical Disks Configured...... 6
# of Physical Disks Detected........ 8
34
Installing the controller
