HP HP 242 G2 Скачать руководство пользователя страница 68

Страница: 68 / 125

Audio/USB board

Description

Spare part number

Audio/USB board (includes cable)

718435-001

Before removing the audio/USB board, follow these steps:

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

Remove the battery (see

Battery on page 33

) and then remove the following components:

Hard drive (see

Hard drive on page 34

)

Memory module service cover (see

Memory module on page 40

)

Optical drive (see

Optical drive on page 42

)

Keyboard (see

Top cover (see

Remove the audio/USB board:

Release the ZIF connector

(1)

to which the audio/USB board cable is attached, and then disconnect the

audio/USB board cable from the system board.

Detach the audio/USB board cable

(2)

from the base enclosure. (The audio/USB board cable is attached

to the base enclosure with double-sided tape.)

Remove the Phillips PM2.5×4.0 screw

(3)

that secures the audio/USB board to the base enclosure.

Remove the audio/USB

(4)

from the base enclosure.

Reverse this procedure to install the audio/USB board.

Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

Содержание HP 242 G2






























































































































Результаты поиска

Содержание HP 242 G2

Отзывы:

HP HP 242 G2, Руководство по техническому обслуживанию и ремонту, Страница: 68 / 125

Результаты поиска

Содержание HP 242 G2

Отзывы: