HP HP 242 G2 Скачать руководство пользователя страница 20

Страница: 20 / 125

Left

Component

Description

(1)

Power connector

Connects an AC adapter.

(2)

AC adapter/Battery light

●

White: The computer is connected to external power and

the battery is fully charged.

●

Amber: The computer is connected to external power and

the battery is charged from 0 to 99 percent.

●

Blinking amber: A battery that is the only available power

source has reached a low battery level. When the battery

reaches a critical battery level, the battery light begins

blinking rapidly.

(3)

Vent

Enables airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool

internal components and prevent overheating. It is normal for

the internal fan to cycle on and off during routine operation.

(4)

External monitor port

Connects an external VGA monitor or projector.

(5)

RJ-45 (network) jack/lights

Connects a network cable.

●

White (left): The network is connected.

●

Amber (right): Activity is occurring on the network.

(6)

HDMI port

Connects an optional video or audio device, such as a high-

definition television, any compatible digital or audio

component, or a high-speed HDMI device.

(7)

USB 3.0 ports (2)

Each USB 3.0 port connects an optional USB device, such as a

keyboard, mouse, external drive, printer, scanner or USB hub.

Chapter 2 External component identification

Содержание HP 242 G2






























































































































Результаты поиска

Содержание HP 242 G2

Отзывы:

HP HP 242 G2, Руководство по техническому обслуживанию и ремонту, Страница: 20 / 125

Результаты поиска

Содержание HP 242 G2

Отзывы: