manualshive.com logo in svg

HP HP 241 G1 Notebook PC, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP HP 241 G1 Notebook PC Скачать руководство пользователя страница 67

Changing the computer boot order

If your computer does not restart in HP Recovery Manager, you can change the computer boot order, which is
the order of devices listed in BIOS where the computer looks for startup information. You can change the
selection for a USB flash drive.

To change the boot order:

1.

Insert the HP Recovery media.

2.

Start Computer Setup:

▲

Turn on or restart the computer, quickly press 

esc

, and then press 

f9

 for boot options.

3.

Select the USB flash drive from which you want to boot.

4.

Follow the on-screen instructions.

Removing the HP Recovery partition (select models only)

HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space.

IMPORTANT:

After you remove the HP Recovery partition, you can no longer use the Windows Refresh

option or the Windows option to remove everything and reinstall Windows. In addition, you will not be able to
perform System Recovery or Minimized Image Recovery from the HP Recovery partition. So before you
remove the Recovery partition, create HP Recovery media; see 

Creating HP Recovery media (select models

only) on page 55

.

Follow these steps to remove the HP Recovery partition:

1.

From the Start screen, type 

recovery

, and then select 

HP Recovery Manager

.

2.

Select 

Remove Recovery Partition

, and then follow the on-screen instructions.

Restore and recovery

59

Содержание HP 241 G1 Notebook PC
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды