HP G3 KVM Скачать руководство пользователя | Manualshive

Страница: 67 / 81

background image

Terminal operation 67

Terminal operation

Terminal operation overview

Each switch can be configured at the switch level through the Terminal Console menu interface, which is

accessed by establishing a terminal session through the DIAG port. All terminal commands are accessed

through a terminal screen or a PC running terminal emulation software.
Hewlett Packard Enterprise recommends making configuration updates in the OSD or OBWI.
To connect a terminal to the switch:

1.

Using a DB9 M/F serial adapter, connect a terminal or a PC that is running terminal emulation

software, such as HyperTerminal software, to the DIAG port on the back panel of the switch. The

terminal settings are 9600 bps, 8 bits, 1 stop bit, no parity, and no flow control.

2.

Power up the switch and each target device. When the switch completes initialization, the Console

menu displays the following message:

Press any key to continue.

Network configuration

To configure network settings using the Console menu:

1.

When powering on the switch, the switch initiates for approximately one minute. After completing

initialization, press any key on the terminal or on the computer running the terminal emulation

software to access the Console menu interface.
Connect the terminal at any time, even when the switch is already powered on.

2.

When the Console Main menu appears, press the number key corresponding to Network

Configuration, and then press the

Enter

key.

3.

Press the

1

key, and then press the

Enter

key to set the network speed. For best performance, set

the switch at the same speed as the Ethernet switch to which it is attached. Press the

Enter

key to

return to the Console Network Configuration menu.

4.

Press the

2

key, and then press the

Enter

key to specify whether the switch uses a static or BOOTP

address.
A static IP configuration might be used to provide a user-defined IP address, netmask or prefix

length, and default gateway for the switch.
BOOTP is a protocol that automates the configuration of TCP/IP-enabled computers. When

selecting BOOTP, the IP address, netmask or prefix length, and default gateway settings are

automatically assigned to the switch and cannot be modified by a switch user.
If using the BOOTP option, configure the BOOTP device to provide an IP address to the switch, and

then go to step 6.

5.

Select the remaining options from the Network Configuration menu to finish the configuration of the

switch with an IP address, netmask or prefix length, and default gateway.

6.

Press the

0

key, and then press the

Enter

key to return to the Console Main menu.

Console Main Menu options

In addition to the Network Configuration option, the Console Main menu of the switch feature the following

menu items:

•

Firmware Management (on page

«
...
65
66
67
68
69
...
»

Содержание G3 KVM


















































































Отзывы:

Нет отзывов

Похожие инструкции для G3 KVM

Бренд: D-Link Страницы: 16

Бренд: D-Link Страницы: 2

Бренд: Hama Страницы: 9

Бренд: Camozzi Страницы: 2

Бренд: FELA Страницы: 13

DES-3224 - Switch

Бренд: D-Link Страницы: 75

PIXIE Smart Switch G3

Бренд: SAL Страницы: 2

Бренд: Server Technology Страницы: 12

Бренд: hager Страницы: 2

2X2 VGA SWITCHER

Бренд: Gefen Страницы: 12

MIEN2208 Series

Бренд: Maiwe Страницы: 5

Бренд: N-Tron Страницы: 169

Бренд: Radio Systems Страницы: 19

Бренд: 3onedata Страницы: 2

Бренд: Jabra Страницы: 13

Бренд: Belkin Страницы: 40

Бренд: NTI Страницы: 15

Бренд: I-Tech Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды