HP G3 KVM Скачать руководство пользователя страница 65

Страница: 65 / 81

Managing remote servers through the Video Session Viewer 65

Mouse alignment and synchronization

Because the switch OBWI cannot receive constant feedback from the mouse, sometimes the mouse on

the switch might become out of sync with the mouse on the host system. If the mouse or keyboard no

longer responds properly, align the mouse to re-establish proper tracking.
Alignment causes the local cursor to align with the remote target device cursor. Resetting causes a

simulation of a mouse and keyboard reconnect, as if you had disconnected and reconnected the mouse

and keyboard.
To realign the mouse, click the

Align Local Cursor

button in the Video Viewer window toolbar.

Keyboard pass-through

Keystrokes entered when using a Video Viewer window might be interpreted in two ways, depending on

the Screen mode of the Video Viewer window.

•

If a Video Viewer window is in Full Screen mode, all keystrokes and keyboard combinations except

Ctrl-Alt-Del

are sent to the viewed remote target device.

•

If a Video Viewer window is in Regular Desktop mode, use Keyboard Pass-through mode to control

whether the remote target device or local computer recognizes certain keystrokes or keystroke

combinations.

Specify keyboard pass-through in the Session Options dialog box. When enabled, keyboard pass-through

sends all keystrokes and keystroke combinations except

Ctrl-Alt-Del

to the viewed remote target

device when the Video Viewer window is active. When the local desktop is active, keystrokes and

keystroke combinations entered by the user affect the local computer.
The keyboard combination

Ctrl-Alt-Del

can be sent only to a remote target device by using a macro.

The Japanese keyboard

Alt-Han/Zen

keystroke combination is always sent to a remote target device

regardless of the Screen mode or keyboard pass-through setting.
To specify keyboard pass-through:

Select

Tools>Session Options

from the Video Viewer window menu.

The Session Options dialog box appears.

Click the

General

tab.

Select

Pass-through all keystrokes in regular window mode

Click

to save the settings.

Macros

The switch OBWI comes preconfigured with macros for Windows, Linux, and Sun platforms.
To send a macro, select

Macros> [selected macro]

from the Video Viewer window menu, or click the

selected macro button on the Video Viewer toolbar.

Saving the view

Save the Video Viewer display either to a file or to the clipboard for pasting into a word processing

program or other program.
To capture the Video Viewer window to a file:

Select

File>Capture to File

from the Video Viewer window menu.

-or-
Click the

Capture to File

button.

Содержание G3 KVM


















































































Результаты поиска

Содержание G3 KVM

Отзывы:

Похожие инструкции для G3 KVM

Бренды по названию

Популярные бренды

HP G3 KVM, Руководство пользователя

Результаты поиска

Содержание G3 KVM

Отзывы:

Похожие инструкции для G3 KVM

Бренды по названию

Популярные бренды