HP FlexNetwork NJ5000, Руководство пользователя

Страница: 137 / 475

125
Item Description
Modify
IPv6
Address
Auto Configure the way in which the VLAN interface gets an IPv6 link-local address.
Select the
Auto
or
Manual
option:
•
Auto
—The device automatically assigns a link-local address to the VLAN
interface according to the link-local address prefix (
FE80::/64
) and the
link-layer address of the VLAN interface.
•
Manual
—Configures an IPv6 link-local address for the VLAN interface
manually.
Manual
Admin
Status
Select
Up
or
Down
from the
Admin Status
list to bring up or shut down the
selected VLAN interface.
When the VLAN interface fails, shut down and then enable the VLAN interface,
which might restore the VLAN interface.
By default, a VLAN interface is down if all Ethernet ports in the VLAN are down.
Otherwise, the VLAN interface is up.
When you set the admin status, follow these guidelines:
•
The current VLAN interface state in the
Modify IPv4 Address
and
Modify
IPv6 Address
frames changes as the VLAN interface state is modified in the
Admin Status
list.
•
The state of each port in the VLAN is independent of the VLAN interface state.
Add IPv6
Unicast
Address
Assign an IPv6 site-local address or global unicast address to the VLAN interface.
Enter an IPv6 address in the field and select a prefix length in the list next to it.
The prefix of the IPv6 address you entered cannot be
FE80::/10
, the prefix of the
link-local address.
The prefix of the IPv6 site-local address you enter must be FEC0::/10.
EUI-64
Select the box to generate IPv6 site-local addresses or global unicast addresses in
the 64-bit Extended Unique Identifier (EUI-64) format.
If the
EUI-64
box is not specified, manually configured IPv6 site-local addresses or
global unicast addresses are used.
Deleting a VLAN interface
You can delete a VLAN interface or the IP address of the VLAN interface.
You can use the IP address of the VLAN interface to log in to the device. You will be disconnected
from the device when you delete one of the following items:
•
VLAN interface whose IP address is used for login.
•
IP address of the VLAN interface that is used for login.
To log in to the device again, you must assign a new address to the VLAN interface at the CLI or use
another available address.
To delete a VLAN interface:
1.
From the navigation tree, select
Network
>
VLAN Interface
.
2.
Click
Remove
.