HP FlexNetwork NJ5000, Руководство пользователя

Страница: 107 / 475

95
Item Description
Group Name
Select an SNMP group to which the user belongs:
•
When the security level is NoAuth/NoPriv, you can select an
SNMP group with no authentication no privacy.
•
When the security level is Auth/NoPriv, you can select an
SNMP group with no authentication no privacy or
authentication without privacy.
•
When the security level is Auth/Priv, you can select an SNMP
group of any security level.
Authentication Mode
Select an authentication mode (including MD5 and SHA) when the
security level is Auth/NoPriv or Auth/Priv.
Authentication Password
Set the authentication password when the security level is
Auth/NoPriv or Auth/Priv.
The confirm authentication password must be the same with the
authentication password.
Confirm Authentication
Password
Privacy Mode
Select a privacy mode (including DES56, AES128, and 3DES)
when the security level is Auth/Priv.
Privacy Password Set the privacy password when the security level is Auth/Priv.
The confirm privacy password must be the same with the privacy
password.
Confirm Privacy Password
ACL
Associate a basic ACL with the user to restrict the source IP
address of SNMP packets. To allow or prohibit the specified NMS to
access the agent by using this user name, you can allow or prohibit
SNMP packets with a specific source IP address.
Configuring SNMP trap function
1.
Select
Device
>
SNMP
from the navigation tree.
2.
Click the
Trap
tab.
The
Trap
tab appears.
Figure 95 Traps configuration
3.
Select
Enable SNMP Trap
.
4.
Click
Apply
to enable the SNMP trap function.