25
5.
Put the protection cover on the wiring terminals.
6.
Connect the other ends of the wires to the DC power source wiring terminals, with the negative
wire (
–
or
L–
) to the negative terminal (
–
) and the positive wire (
+
or
M/N
) to the positive terminal
(
+
).
Figure 26 Connecting DC power cords
Connecting power cords for the PSR1200-D
CAUTION:
The power cord color code scheme in this section is for illustration only. The cable delivered for your
country or region might use a different color scheme. When you connect a power cord, always
identify the polarity symbol on its wires.
To connect DC power cords:
1.
Use a Phillips screwdriver to loosen the captive screw that secure the terminal block to the
power supply. Remove the terminal block.
Figure 27 Removing the terminal block
2.
Insert one end of the wire marked with “–” into the terminal marked with “–”, and fasten the
screw to fix the cord.