HP FlexNetwork 7500 Series, Справочник по командам

Страница: 723 / 738

708
[Sysname-Ten-GigabitEthernet1/0/1] web-auth max-user 32
Related commands
display web-auth
web-auth offline-detect
Use web-auth offline-detect to enable online detection of Web authentication users.
Use undo web-auth max-user to disable online detection of Web authentication users.
Syntax
web-auth offline-detect interval interval
undo web-auth offline-detect interval
Default
Online detection of Web authentication users is disabled.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Parameters
interval : Specifies the Web authentication user detection interval, in the range of 60 to 65535
seconds.
User guidelines
This feature enables the device to detect packets of an online user at the specified detection interval.
If no packet from the user is received within the interval, the device logs out the user and notifies the
RADIUS server to stop accounting for the user.
To prevent the device from mistakenly logging out users, set the detection interval to be the same as
the aging time of MAC address entries.
Examples
# On Ten-GigabitEthernet 1/0/1, enable online detection of Web authentication users and set the
detection interval to 3600 seconds.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] web-auth offline-detect interval 3600
web-auth proxy port
Use web-auth proxy port to add the port number of a Web proxy server, so that HTTP requests
forwarded by the Web proxy server trigger Web authentication.
Use undo web-auth proxy port to delete one or all Web proxy server port numbers.
Syntax
web-auth proxy port port-number
undo web-auth proxy port { port-number | all }