HP FlexNetwork 7500 Series, Справочник по командам

Страница: 541 / 738

526
The login failure counter for a user is reset after the user logs in successfully. If the device reboots, all
login failure counters are reset.
Examples
# Set the maximum number of successive login failures to five.
<Sysname> system-view
[Sysname] attack-defense login max-attempt 5
Related commands
attack-defense login enable
attack-defense login reauthentication-delay
Use attack-defense login reauthentication-delay to enable the login delay feature.
Use undo attack-defense login reauthentication-delay to restore the default.
Syntax
attack-defense login reauthentication-delay seconds
undo attack-defense login reauthentication-delay
Default
The login delay feature is disabled. The device does not delay accepting a login request from a user
who has failed a login attempt.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
seconds : Specifies the delay period in seconds, in the range of 4 to 60.
Usage guidelines
The login delay feature delays the device to accept a login request from a user after the user fails a
login attempt. This feature can slow down login dictionary attacks.
The login delay feature is independent of the login attack prevention feature.
Examples
# Enable the login delay feature and set the delay period to 5 seconds.
<Sysname> system-view
[Sysname] attack-defense login reauthentication-delay 5
attack-defense policy
Use attack-defense policy to create an attack defense policy and enter its view, or enter the view of
an existing attack defense policy.
Use undo attack-defense policy to delete an attack defense policy.
Syntax
attack-defense policy policy-name