HP FlexNetwork 7500 Series, Справочник по командам

Страница: 386 / 738

371
[Sysname-pkey-public-key-key1]0001
[Sysname-pkey-public-key-key1] peer-public-key end
[Sysname]
Related commands
display public-key local public
display public-key peer
public-key peer
public-key local create
Use public-key local create to create local key pairs.
Syntax
In non-FIPS mode:
public-key local create { dsa | ecdsa [ secp192r1 | secp256r1 | secp384r1 | secp521r1 ] | rsa }
[ name key-name ]
In FIPS mode:
public-key local create { dsa | ecdsa [ secp256r1 | secp384r1 | secp521r1 ] | rsa } [ name
key-name ]
Default
No local key pairs exist.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
dsa : Specifies the DSA key pair type.
ecdsa : Specifies the ECDSA key pair type.
•
secp192r1 : Uses the secp192r1 curve to create a 192-bit ECDSA key pair. The secp192r1
curve is used by default in non-FIPS mode.
•
secp256r1 : Uses the secp256r1 curve to create a 256-bit ECDSA key pair. The secp256r1
curve is used by default in FIPS mode.
•
secp384r1 : Uses the secp384r1 curve to create a 384-bit ECDSA key pair.
•
secp521r1 : Uses the secp521r1 curve to create a 521-bit ECDSA key pair.
rsa : Specifies the RSA key pair type.
name key-name : Assigns a name to the key pair. The key-name argument is a case-insensitive
string of 1 to 64 characters. Valid characters are letters, digits, and hyphens (-). If you do not assign
a name to the key pair, the key pair takes the default name.
Table 40 Default local key pair names
Type Default name
RSA
•
Host key pair: hostkey
•
Server key pair: serverkey