HP FlexNetwork 6600, Руководство по настройке

Страница: 44 / 180

37
Do not configure GTS on a main interface and its subinterfaces at the same time.
Configuring GTS by using the policy approach
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create a class and
enter class view.
traffic classifier classifier-name [ operator
{ and | or } ]
N/A
3. Configure match
criteria.
if-match [ not ] match-criteria N/A
4. Return to system
view.
quit N/A
5. Create a behavior and
enter behavior view.
traffic behavior behavior-name N/A
6. Configure a GTS
action.
•
In absolute value:
gts cir committed-information-rate
[ cbs committed-burst-size [ ebs
excess-burst-size [ queue-length
queue-length ] ] ]
•
In percentage:
gts percent cir cir-percent [ cbs
cbs-time [ ebs ebs-time ] ]
N/A
7. Return to system
view.
quit N/A
8. Create a policy and
enter policy view.
qos policy policy-name N/A
9. Associate the class
with the traffic
behavior in the QoS
policy.
classifier classifier-name behavior
behavior-name
N/A
10. Return to system
view.
quit N/A
11. Apply the QoS policy.
•
Applying the QoS policy to an interface
or PVC
•
Applying the QoS policy to a VLAN
Choose one of the application
destinations as needed.
Configuring GTS by using the non-policy approach
When you configure GTS in non-policy approach, you can configure the following types of GTS:
•
ACL-based GTS —Sets GTS parameters for the traffic matching the specific ACL. By
specifying multiple ACLs, you can set GTS parameters for different classes of traffic.
•
GTS for all traffic —Configures GTS parameters for all traffic.
Configuring ACL-based GTS
Step Command
1. Enter system view.
system-view
2. Defining an ACL.
See "Configuring ACLs."
3. Enter interface view.
interface interface-type interface-number