17
Trying 192.168.1.41 ...
Press CTRL+K to abort
Connected to 192.168.1.41 ...
******************************************************************************
* Copyright (c) 2010-2015 Hewlett-Packard Development Company, L.P. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
<Sysname.41>
This operation is the same as directly logging in to the device at 192.168.1.41 through Telnet. When you
break the Telnet connection to 192.168.1.41, the Telnet connection to 192.168.1.40 is broken at the same
time.
command accounting
Use
command accounting
to enable command accounting.
Use
undo command accounting
to restore the default.
Syntax
command accounting
undo command accounting
Default
Command accounting is disabled. The accounting server does not record executed commands.
Views
User line view, user line class view
Predefined user roles
network-admin
Usage guidelines
When command accounting is enabled but command authorization is not, every executed command is
recorded on the HWTACACS server.
When both command accounting and command authorization are enabled, only authorized commands
that are executed are recorded on the HWTACACS server.
Invalid commands issued by users are not recorded.
If the
command accounting
command is configured in user line class view, command accounting is
enabled on all user lines in the class, and you cannot configure the
undo command accounting
command in the view of a user line in the class.
Examples
# Enable command accounting for user line VTY 0.
<Sysname> system-view
[Sysname] line vty 0
[Sysname-line-vty0] command accounting
Related commands
•
accounting command
(
Security Command Reference
)
