HP EX485 - MediaSmart Server - 2 GB RAM, Руководство пользователя

Страница: 43 / 336

Updating Client PCs
Note
Update the server software prior to updating the client software. If your server does not have the
correct software version, you will get an error message when you try to install the client software.
See
Updating and Rolling Back the Server for more information.
After installing the server update, you are ready to update the client software on each PC in your
home that accesses the server. For Mac instructions, see
Updating and Rolling Back a Mac Client .
1. At the computer, click Start , and then Run .
Type or copy/paste the following ( UNC ) network address into the Run dialog.
\\HPSERVER\Software\Home Server Connector Software\setup.exe
If you renamed your server during the initial software installation, the path will be \\<server
name>\Software\Home Server Connector Software\setup.exe.
2. Follow the instructions on your computer for installing the update.
There are other methods for installing the update. For more details, see Updating and Rolling
Back Client PCs .
Installing Software on Additional PCs
You can install the server through a web browser or you can use the Software Installation Disc to
install the HP MediaSmart Server and Windows Home Server Connector software on the other
computers on the home network. Install the software on one computer at time.
If you misplaced or damaged your Software Installation Disc, you can also install the software for
your computer directly from the server. For more information, see
To install from the server using
Windows XP or Windows Vista .
To install from the Software Installation Disc
1. Insert the Software Installation Disc into a computer connected to the home network.
You must have administrative privileges to install. For additional information, see Installing the
Software on the First Computer.
37