•
Name—Component name
•
Version—Component version
•
File name—Component file name
•
Size—Component size
•
Uploaded—Upload date and time
•
Installable by—The software that can initiate an update with the component.
•
In use by install set or task?—Whether the component is part of an install set or queued task.
When a component is part of an install set or queued task, you can click the install set or task name link to view the
install set details or queued task details.
Installation queue
The installation queue is an ordered list of components and commands that were added to the queue individually or as
parts of an install set. You can add tasks to the queue by using the following methods:
• Use the iLO
Add to Queue pane.
• Click on the
Installation Queue page.
• Click on the iLO Repository page.
• Use SUM.
Adding a task to the installation queue
Prerequisites
• The Configure iLO Settings privilege is required for adding tasks to the installation queue.
• The Recovery Set privilege is required for making an optional update to the System Recovery Set after a queued
update is completed successfully.
• If you want to use the
Update Recovery Set feature, a System Recovery Set must exist and contain the component
you want to update.
Procedure
1. Click Firmware & OS Software in the navigation tree, and then click the Installation Queue tab.
2. Click or click Add to Queue.
The
Add to Queue pane is available whenever you view a tab on the Firmware & OS Software page. If the browser
window is a small size, and the
Add to Queue option is not displayed, click the ellipsis icon in the top right corner of
the iLO web interface, then click
Add to Queue.
iLO prompts you to add task information.
3. Enter a task name (up to 64 characters) in the Task name box.
4. Select a value in the Component/Command box.
The list includes the following:
Using HPE iLO 5
58
