HP Engage One Retail System 143, Руководство по техническому обслуживанию и ремонту

Страница: 61 / 141

Removing the speakers
The computer uses two separate speakers located on the left and right sides. Each speaker has a cable that
connects to a separate connector.
To remove the speakers:
1. Prepare the computer for disassembly ( Preparation for disassembly on page 19 ).
2. Remove the computer head unit from the stand ( Removing and attaching the Engage One head unit to
the stand on page 27 ).
3. Remove the display panel from the computer head unit ( Removing the display panel on page 41 )
4. For each speaker, disconnect the cable from the system board (1), and then use a flat tool to pry each
speaker out of the computer head unit (2). The speakers are held in place with adhesive.
To replace the speakers, reverse the removal procedures.
Removing the speakers 53