HP EliteDesk 705 G5 Скачать руководство пользователя | Manualshive

Страница: 95 / 137

background image

Sound from headphones is not clear or muffled.

Cause

Solution

Headphones are plugged into the rear audio output connector.
The rear audio output connector is for powered audio devices and
is not designed for headphone use.

Plug the headphones into the headphone connector on the front
of the computer.

Computer appears to be locked up while recording audio.

Cause

Solution

The hard disk might be full.

Before recording, make sure there is enough free space on the
hard disk. You can also try recording the audio file in a
compressed format.

Line-in jack is not functioning properly.

Cause

Solution

Jack has been reconfigured in the audio driver or application
software.

In the audio driver or application software, reconfigure the jack or
set the jack to its default value.

There is no sound or sound volume is too low.

Cause

Solution

The application is set to use a different audio device than
speakers.

Some graphics cards support audio over the DisplayPort
connection (if applicable), so multiple audio devices might be
listed in Device Manager. Make sure the correct device is being
used.

To access Device Manager in Windows 10, type

device

manager

in the taskbar search box, and then select Device

Manager from the list of applications.

Some applications can select which audio output device is used.

Make sure the application has selected the correct audio device.

The operating system controls might be set to use a different

audio device as the default output device than what is expected.

Set the operating system to use the correct audio device.

Solving printer problems

If you encounter printer problems, see the documentation that came with the printer and to the common
causes and solutions listed in the following table.

Printer will not print.

Cause

Solution

Printer is not turned on and online.

Turn the printer on and make sure it is online.

The correct printer drivers for the application are not installed.

1.

Install the correct printer driver for the application.

2.

Try printing using the MS-DOS command:

Solving printer problems

87

«
...
93
94
95
96
97
...
»

Содержание EliteDesk 705 G5










































































































































Отзывы:

Нет отзывов

Похожие инструкции для EliteDesk 705 G5

Бренд: SeaLevel Страницы: 40

Бренд: Gateway Страницы: 2

Бренд: Vivo Страницы: 3

Бренд: Dell Страницы: 13

Бренд: Black & Decker Страницы: 20

Бренд: IBM Страницы: 53

Бренд: Wincor Nixdorf Страницы: 32

UNO-3200G Series

Бренд: Advantech Страницы: 50

Бренд: Advantech Страницы: 52

Бренд: Advantech Страницы: 52

Бренд: Advantech Страницы: 2

ITA-5231 Series

Бренд: Advantech Страницы: 5

IACP-4000 Series

Бренд: Advantech Страницы: 28

DLoG DLT-V72 Series

Бренд: Advantech Страницы: 98

ARK-5420 Series

Бренд: Advantech Страницы: 80

Бренд: Advantech Страницы: 52

ARK-3381 Series

Бренд: Advantech Страницы: 86

Бренд: Advantech Страницы: 51

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды