manualshive.com logo in svg

HP EliteDesk 705 G5, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP EliteDesk 705 G5 Скачать руководство пользователя страница 33

Slim optical drive bezel blank

On some models, there is a bezel blank covering the slim optical drive bay. Remove the bezel blank before 
installing an optical drive.

Before removing the bezel blank, follow these steps:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 20

).

2.

Remove the access panel (

Access panel on page 23

).

3.

Remove the front bezel (

Front bezel on page 24

).

Remove the bezel blank:

▲

Press inward on the tab on the left side of the blank (1), and then rotate the blank off the front bezel (2).

NOTE:

After removing the slim optical drive bezel blank and installing a slim optical drive, you can install an 

optional bezel trim piece (available from HP) that surrounds the front of the slim optical drive.

Slim optical drive bezel blank

25

Содержание EliteDesk 705 G5










































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды