HP EliteDesk 705 G5 Скачать руководство пользователя

Страница: 107 / 137

Unable to connect to the Internet.

Cause

Solution

Click Internet Options.

In the Browsing history section, click the Delete button.

Select the Cookies and website data check box and click the
Delete button.

Cannot automatically launch Internet programs.

Cause

Solution

You must log on to your ISP before some programs will start.

Log on to your ISP and launch a program.

Solving software problems

Most software problems occur as a result of the following issues:

●

The application was not installed or configured correctly.

●

There is insufficient memory available to run the application.

●

There is a conflict between applications.

●

All the necessary device drivers might not have been installed.

●

If you have installed an operating system other than the factory-installed operating system, it might not
be supported on the system.

If you encounter software problems, see the applicable solutions listed in the following table.

Computer will not continue and the HP logo does not appear.

Cause

Solution

ROM issue - POST error has occurred.

Observe the beeps and LED lights on the front of the computer.
See

POST error messages on page 100

to determine possible

causes.

See the Worldwide Limited Warranty for terms and conditions.

“Illegal Operation has Occurred” error message is displayed.

Cause

Solution

Software being used is not Microsoft-certified for your version of
Windows.

Verify that the software is certified by Microsoft for your version
of Windows (see program packaging for this information).

Configuration files are corrupt.

If possible, save all data, close all programs, and restart the
computer.

Solving software problems

Содержание EliteDesk 705 G5










































































































































Результаты поиска

Содержание EliteDesk 705 G5

Отзывы:

Похожие инструкции для EliteDesk 705 G5

Бренды по названию

Популярные бренды

HP EliteDesk 705 G5, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание EliteDesk 705 G5

Отзывы:

Похожие инструкции для EliteDesk 705 G5

Бренды по названию

Популярные бренды