manualshive.com logo in svg

HP EliteBook x360 1040 G5, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP EliteBook x360 1040 G5 Скачать руководство пользователя страница 58

4.

If the WWAN antenna is not connected to the terminal on the WWAN module, a protective sleeve must be 
installed on the antenna connector, as shown in the following illustration.

Reverse this procedure to install the WWAN module.

Connector board cable

To remove the connector board cable, use this procedure and illustration.

NOTE:

The connector board cable is available in the Cable Kit, spare part number M20833-001.

Before removing the connector board cable, follow these steps:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 44

).

2.

Remove the bottom cover (

Bottom cover on page 44

).

3.

Disconnect the battery cable from the system board the battery (see 

Battery on page 45

).

Remove the connector board cable:

1.

Release the zero insertion force (ZIF) connector (1) to which the connector board cable is connected, and 
then disconnect the cable from the system board.

2.

Release the ZIF connector (2) to which the connector board cable is connected, and then disconnect the 
cable from the connector board.

50

Chapter 5   Removal and replacement procedures for authorized service provider parts

ENWW

Содержание EliteBook x360 1040 G5















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды