3.
Remove the cable between the speakers from the clips (3), and then remove the speakers from the
computer (4) .
Reverse this procedure to install the speakers.
Card reader board
To remove the card reader board, use this procedure and illustration.
Table 6-3
Card reader board description and part number
Description
Spare part number
Card reader board
N08543-001
Card reader board cable (included in cable kit)
N08556-001 (FPC)
N08557-001 (FFC)
Before removing the card reader board, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 40
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the card reader board:
1.
Disconnect the cable that secures the card reader board to the system board (1), and remove it (2).
50
Chapter 6 Removal and replacement procedures for authorized service provider parts