HP EliteBook 850 G7, Руководство по техническому обслуживанию и ремонту

Страница: 50 / 109

Solid-state drive
To remove the M.2 solid-state drive, use this procedure and illustration.
Table 5-5 Solid-state drive descriptions and part numbers
Description Spare part number
1 TB, PCIe, TLC L85348-002
512 GB, PCIe, TLC L85360-002
512 GB, PCIe, TLC, self-encrypting drive (SED) L85368-002
512 GB, PCIe, value L85364-002
512 GB, PCIe + 32 GB Optane memory L85366-002
256 GB, PCIe, value L85354-002
256 GB, PCIe + 16 GB Optane memory L85356-002
128 GB, SATA-3, TLC L85346-002
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly ( Preparation for disassembly on page 32 ).
2. Remove the bottom cover ( Bottom cover on page 32 ).
3. Disconnect the battery cable from the system board (see Battery on page 41 ).
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the drive to the computer.
2. Pull the drive away from the socket to remove it (2).
To install the solid-state drive, reverse the removal procedures.
NOTE: Solid-state drives are designed with a notch to prevent incorrect insertion.
40 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts