manualshive.com logo in svg

HP ELITEBOOK 840 G4, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP ELITEBOOK 840 G4 Скачать руководство пользователя страница 77

Display assembly

Description

Spare part number

Display panel assembly, touch screen

NOTE:

Touch screen display assemblies are spared only as whole unit hinge-ups.

NOTE:

 Non-touch display assemblies are spared at the subcomponent level only. For more non-touch 

display assembly spare part information, see 

Display assembly subcomponents on page 21

.

910584-001

Display panel assembly, privacy

NOTE:

All privacy display assemblies including non-touch are spared as whole unit hinge-ups.

922076-001

Before removing the display assembly, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and 
then unplugging the AC adapter from the computer.

4.

Remove the bottom cover (see 

Bottom cover on page 32

).

5.

Remove the battery (see 

Battery on page 36

).

6.

Remove the internal base plate (see 

Internal base plate on page 50

)

Remove the display assembly:

1.

Disconnect the display cable (1) and the touch cable (2) from the system board.

2.

Remove the 3 Phillips M2.5×5.0 screws (1) from the display hinges.

Component replacement procedures

67

Содержание ELITEBOOK 840 G4





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды