manualshive.com logo in svg

HP ELITEBOOK 840 G4, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP ELITEBOOK 840 G4 Скачать руководство пользователя страница 68

NFC module

Description

Spare part number

NFC (Near Field Communication) module (includes NFC cable, antenna cable, Mylar insulator, and foam)

821666-001

Before removing the NFC module, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the bottom cover (see 

Bottom cover on page 32

).

5.

Remove the battery (see 

Battery on page 36

).

6.

Remove the keyboard (see 

Keyboard on page 47

).

7.

Remove the internal base plate (see 

Internal base plate on page 50

Remove the NFC module:

1.

Disconnect the system board cable (1) and the NFC antenna (2) from the NFC module.

2.

Pry the NFC module from the smart card reader (3), and the lift it from the computer (4).

NOTE:

The NFC antenna is also spared with the touchpad.

Reverse the removal procedures to install the NFC module.

58

Chapter 6   Removal and replacement procedures for Authorized Service Provider parts

Содержание ELITEBOOK 840 G4





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды