background image

Table 2-6

  Button, speakers, and fingerprint reader and their descriptions

Component

Description

(1)

Speakers (2)

Produce sound

(2)

Vents (2)

Enable airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool 

internal components and prevent overheating. It is normal for 
the internal fan to cycle on and off during routine operation.

(3)

Power button

When the computer is off, press the button briefly to turn 
on the computer.

When the computer is on, press the button briefly to 
initiate Sleep.

When the computer is in the Sleep state, press the 
button briefly to exit Sleep (select products only).

When the computer is in Hibernation, press the button 
briefly to exit Hibernation.

IMPORTANT:

Pressing and holding down the power button 

results in the loss of unsaved information.

If the computer has stopped responding and shutdown 
procedures are ineffective, press and hold the power button 
down for at least 4 seconds to turn off the computer.

To learn more about your power settings, see your power 
options:

Right-click the Power icon, and then select Power 
Options
.

(4)

Fingerprint reader (select products only)

Allows a fingerprint logon to Windows, instead of a password 
logon.

Swipe down across the fingerprint reader.

12

Chapter 2   Components

Содержание EliteBook 835 G7













































































































Отзывы: