manualshive.com logo in svg

HP EliteBook 735 G5, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP EliteBook 735 G5 Скачать руководство пользователя страница 76

8.

Remove the display bezel (4).

The display bezel (kit includes camera shutter) is available using the following spare part numbers:

Models with a microphone module: L14934-001

Models with an HD camera: L14933-001

Models with an IR camera: L14932-001

Models with an IR camera and an ambient light sensor: L14931-001

9.

Two different camera modules are available. Refer to the following procedure appropriate for your 
computer if it is necessary to replace the camera module:

a.

HD camera or microphone module

HD and IR camera shutters are available in the Plastics Kit using spare part number L13692-001.

Lift upward to disengage the module from the adhesive on the display enclosure (1), disconnect 
the cable from the module (2), and then remove the module from the display (3).

66

Chapter 6   Removal and replacement procedures for Authorized Service Provider parts

Содержание EliteBook 735 G5

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды