manualshive.com logo in svg

HP Elite x2 G8, Руководство по техническому обслуживанию и ремонту, Страница: 59 / 184

Поделиться
Скачать
HP Elite x2 G8 Скачать руководство пользователя страница 59

Remove the solid-state drive:

1.

Remove the tape from the solid-state drive (1). 

2.

Remove the Phillips M1.4 × 1.6 screw (2), and then remove the solid-state drive (3).

To install the solid-state drive, reverse the removal procedures.

NOTE:

Solid-state drives are designed with a notch to prevent incorrect insertion.

SIM card holder board

To remove and disassemble the SIM card holder board, use these procedures and illustrations.

Table 6-4

SIM card holder board descriptions and part numbers

Description

Spare part number

SIM card holder board

M51642-001

SIM card holder cable

L67423-001

Before removing the SIM card holder board, follow these steps:

1.

Prepare the computer for disassembly (see 

Preparation for disassembly on page 40

).

2.

Remove the display panel (see 

Display panel on page 42

).

3.

Remove the battery (see 

Battery on page 46

).

Remove the SIM card holder board:

SIM card holder board

49

Содержание Elite x2 G8

























































































































































































Отзывы:

Нет отзывов