manualshive.com logo in svg

HP Elite x2 G8, Руководство по техническому обслуживанию и ремонту, Страница: 130 / 184

Поделиться
Скачать
HP Elite x2 G8 Скачать руководство пользователя страница 130

Table 7-48

Issues, possible causes, and fixes (continued)

Items

Procedures
6.

Test with a verified working hard drive. If it is not recognized, the system board is 

faulty.

Note

If there is a hard drive POST error message, see 

POST error messages and user actions on 

page 127

.

Slow performance

Use this information to troubleshoot performance issues.

Table 7-49

Issues, possible causes, and fixes

Items

Procedures

Symptoms

Slow performance even when 

performing small read-write 

operations

Possible causes

Operating system files, hard drive is full.

Troubleshooting steps

1.

Transfer data from the hard drive to create more space. Microsoft recommends at least 

200 MB to sync system files.

2.

Perform disk defragmentation to consolidate fragmented data on the hard drive so 

that it works more efficiently.

NOTE:

Do not defragment an SSD.

Tips & tricks

For optimal system performance, place your operating system and all of your most 

commonly used applications and files on the fastest hard drive (solid-state drive) and fastest 

areas on the drive (primary partition of 200 GB max).

See 

Routine maintenance for performance improvement on page 129

).

Blue screen (BSOD) error

A faulty hard drive can cause a blue screen error. Perform the drive tests using the HP Diagnostics Tool to be 

sure that the drive is functional.

If all of the tests are successful, see 

Common blue screen error messages on page 130

 for detailed 

troubleshooting steps.

Noisy hard drive

Use this information to troubleshoot a noisy hard drive.

IMPORTANT:

Because an SSD has no moving parts, it does not make loud or clicking noises.

Depending on type and rotational speed, some hard drives make more noise than others.

Not all noises are related to the fan or hard drive.

Table 7-50

Issues, possible causes, and fixes

Items

Procedures

Symptoms

Possible causes

120

Chapter 7  Troubleshooting guide

Содержание Elite x2 G8

























































































































































































Отзывы:

Нет отзывов